Memory Seats

If equipped with memory seats, up to two drivers can store and recall their unique driving seat positions and a common exit position for exiting the vehicle. Other functional positions can also be stored, such as power mirrors and a power tilt/telescope steering wheel, if equipped. Memory positions are linked to RKE transmitter 1 or 2 for automatic memory recall.

Before storing, adjust all available memory feature positions. Turn the ignition on, then press and release SET; a beep will sound.

Then immediately press and hold 1, 2, or(Exit) until two tones sound. To manually recall these positions, press and hold 1, 2, oruntil the stored position is reached. Follow the instructions under "Storing Memory Positions".

The vehicle determines the current RKE transmitter number of the driver (1–8). See Remote Keyless Entry (RKE) System Operation. Only RKE Transmitters 1 and 2 can be used for automatic memory recall. The Driver Information Center (DIC) welcome message showing the transmitter number may be displayed for the first few ignition cycles after replacing a transmitter. For proper memory seat entry operation, store positions to memory button (1 or 2) matching the RKE transmitter number shown in the DIC welcome message. Carry the associated RKE transmitter when entering the vehicle.

Memory settings may not be available at delivery or after service until the steps in the "Storing Memory Positions" section have been completed.