GMC Terrain Quiz
Seats and Restraints

Storing Memory Positions

In this manual: Seats and Restraints
Introduction — 1In Brief — 46Keys, Doors and Windows — 37Seats and Restraints — 60Storage — 6Instruments and Controls — 58Lighting — 16Infotainment System — 1Climate Control — 8Driving and Operation — 128Vehicle Care — 75Service and Maintenance — 8Technical Data — 5Customer Information — 18OnStar — 6Connected Services — 4
5steps
~30min
2/5difficulty
Done 0 of 5

Read this entire procedure before storing memory positions.

To store the preferred driving positions for Driver 1 and Driver 2:

  1. Turn the ignition on or set to ACC/ACCESSORY.

    The DIC welcome message may display the driver number, 1 or 2.

  2. Adjust all available memory features to the desired driving position.
  3. Press and release SET; a chime will sound.
  4. Immediately press and hold the memory button 1 or 2 corresponding to the welcome message displayed on the DIC until two chimes sound.

    If too much time passes between releasing SET and pressing 1, the memory position will not be stored and two chimes will not sound. Repeat Steps 3 and 4.

    1 or 2 corresponds to the driver number. See "Driver Identification Number" earlier in this section.

  5. Repeat Steps 1–4 for the other driver, using 1 or 2.

To store the position forGMC Terrain. Saving Memory Positionsand Seat Exit Memory, repeat Steps 1–4 usingGMC Terrain. Saving Memory Positions. This stores the exit position.

Store the preferred memory position feature to 1 and 2 if you are the only driver.

Test yourself

A quick GMC Terrain quiz: every answer comes with an explanation and a link to the manual page.