A/C Refrigerant Oil Replacement (With A/C)
Special Tools Required
- Oil Injector Tool Robinair ROB16256, commercially available
*This tool is available through the Honda Tool and Equipment Program; call 888-424-6857
Recommended PAG oil: SP-10
P/N 38897-P13-A01AH: 120 mL (4 fl·oz)
It is important to have the correct amount of refrigerant oil in the A/C system to ensure proper lubrication of the A/C compressor. Too little oil damages the A/C compressor; too much oil reduces the cooling capacity of the system, and can produce high vent temperatures.
To avoid contamination, do not return the oil to the container once dispensed, and never mix it with other refrigerant oils.
Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
Do not spill the refrigerant oil on the vehicle; it may damage the paint; if it gets on the paint, wash it off immediately.
Add the recommended refrigerant oil in the amount listed if you replace any of the following parts:
A/C condenser (including receiver/dryer). |
25 mL (5/6 fl·oz) |
Evaporator. |
35 mL (1 1/6 fl·oz) |
Line or hose. |
10 mL (1/3 fl·oz) |
Receiver/dryer. |
10 mL (1/3 fl·oz) |
Leakage repair. |
25 mL (5/6 fl·oz) |
A/C compressor. |
Oil drainage is unnecessary at the time of compressor replacement. |
Test yourself
A quick Honda Fit quiz: every answer comes with an explanation and a link to the manual page.