Body
Driver's Power Tailgate Switch Test/Replacement
In this manual: Body
6steps
~36min
2/5difficulty
Done 0 of 6
Remove the driver's middle panel.
Disconnect the 6P [17P] connector (A) from the driver's power tailgate switch (B).
[ ]: With parking and back-up sensor system
Check for continuity between the terminals in each switch position according to the table.
With parking and back-up sensor system. If the continuity is not as specified, replace the bulb (C) or driver's power tailgate switch.
Without parking and back-up sensor system: If the continuity is not as specified, replace the bulb (A) or driver's power tailgate switch.
Install the switch in the reverse order of removal.
Was this page helpful?