Body
Tailgate Outer Handle Switch Test/Replacement
In this manual: Body
10steps
~60min
3/5difficulty
Done 0 of 10
Test
Remove the tailgate lower trim panel.
Disconnect the 2P connector (A) from the tailgate outer handle switch.
Check for continuity between the terminals in each switch position according to the table.
If the continuity is not as specified, replace the tailgate outer handle switch.
Replacement
Removal the tailgate lower trim panel.
Disconnect the 2P connector (A) from the tailgate outer handle switch.
Remove the two nuts (A).
If equipped, disconnect the rearview camera 6P [12P] connector (B).
[ ]: With navigation
Replace the tailgate outer handle switch (A).
Install the new switch in the reverse order of removal.
Was this page helpful?