Body

Power Tailgate Inside Switch Test/Replacement

4steps
~24min
2/5difficulty
Done 0 of 4
  1. Carefully pry out the inside tailgate switch (A), and disconnect the 5P connector (B) from the switch.

  2. Check for continuity between the terminals in each switch position according to the table.

  3. If the continuity is not as specified, replace the bulbs (C) or the switch.

  4. Install the switch in the reverse order of removal.

Resetting the Power Tailgate Control Unit

If the battery terminal is disconnected or the No. B16 (10 A) fuse in the under-hood fuse/relay box is removed while the power tailgate is operating, the power tailgate will not be able to open or close automatically until it is reset. To reset the system, fully close the tailgate manually. Once the battery terminals are reconnected or the No. B16 (10 A) fuse in the under-hood fuse/relay box is replaced, the power tailgate system automatically resets. Make sure the power tailgate operates properly.