Chassis

Exploded View

~1min read
0204060801005742N·mlb·ft
Tightening torque found on this page
DAMPER MOUNTING WASHERCheck for deterioration.DAMPER MOUNTING BASECheck for deterioration.SELF-LOCKING NUT12 x 1.25 mm57 N·m(5.8 kgf·m, 42 lbf·ft)Replace.BUMP STOP SLEEVEBUMP STOPCheck for weakness, oil contamination, and damage.DAMPER MOUNTING BEARINGCheck for any play or roughness.UPPER SPRING SEATDAMPER UNITCheck for oil leaks, gas leaks,and smooth operation.LOWER SPRING RUBBERCheck for deterioration and damage.DAMPER SPRINGCheck for damage.DUST COVERCheck for deteriorationand damage.SELF-LOCKING NUT12 x 1.25 mm70 N·m(7.1 kgf·m, 52 lbf·ft)Replace.*1: Without damper mounting washer type*2: With damper mounting washer type*1*2

NOTE:

  • When compressing the damper spring, use a commercially available strut spring compressor (Branick MST-580A or Model 7200, or equivalent) according to the manufacturer's instructions.

  • Refer to the Exploded View as needed during the following procedure.

  • The illustrations show with damper mounting washer type.