Chassis

Front Parking Brake Cable Replacement

10steps
~60min
3/5difficulty
010203040509.37N·mlb·ft
Tightening torque found on this page
Done 0 of 10
  1. Release the parking brake pedal.

  2. Remove the driver's side front door sill trim and the kick panel.

  3. Remove the footrest.

  4. Pull back the carpet (A), then remove the equalizer cover (B).

  5. Disconnect and remove the return spring (A), then remove the wire guide base (B).

  6. Disconnect the rear parking brake cables (C) from the equalizer (D).

  7. Remove the parking brake cable from the parking brake pedal assembly.

  8. Remove the parking brake cable mounting hardware, then remove the cable.

  9. Install the parking brake cable in the reverse order of removal.

  10. Adjust the parking brake.

    NOTE: Do the Major Adjustment first, then do the Minor Adjustment. Apply the parking brake firmly 10 times then adjust it again.