Chassis Parking Brake Cable Replacement In this manual: Chassis Vehicle General — 4Accessories — 103Body — 232Chassis — 83Electrical — 28HVAC — 26 ~1min read 010203040509.37N·mlb·ftTightening torque found on this page Exploded View FRONT PARKING BRAKE CABLECheck for faulty movement.6 x 1.0 mm9,3 N·m (0.95 kgf·m, 6.9 lbf·ft)PARKING BRAKE PEDALCheck for smooth operation.REAR RIGHT PARKING BRAKE CABLECheck for faulty movement.EQUALIZERREAR LEFT PARKING BRAKE CABLECheck for faulty movement.6 x 1.0 mm9,3 N·m (0.95 kgf·m, 6.9 lbf·ft)PARKING BRAKE SWITCHADJUSTING NUT8 x 1.25 mm21 N·m (2.1 kgf·m, 15 lbf·ft)Multipurpose(Sliding surface)PARKING BRAKEPEDAL ASSEMBLY8 x 1.25 mm22 N·m (2.2 kgf·m, 16 lbf·ft)8 x 1.25 mm22 N·m (2.2 kgf·m, 16 lbf·ft)1,4 N·m (0.14 kgf·m, 1.0 lbf·ft)?WIRE GUIDE BASERETURN SPRINGCLIPReplace.8 x 1.25 mm22 N·m (2.2 kgf·m, 16 lbf·ft) NOTE: The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature cable failure. Refer to the Exploded View as needed during these procedures. ← Previous Minor Adjustment Next → Front Parking Brake Cable Replacement Was this page helpful?👍 Yes👎 No