Accessories

Rearview Mirror Replacement (With FCW/LDW)

5steps
~30min
2/5difficulty
010203040503.93N·mlb·ft
Tightening torque found on this page
Done 0 of 5
  1. Release the hooks (A), then remove the FCW/LDW camera cover lid (B).

  2. Disconnect the rearview mirror connector (A).

  3. Release the hooks (A), then remove the FCW/LDW camera cover (B).

  4. Loosen the screw with a TORX T20 bit, then slide the rearview mirror (A) rearward and off the mount (B).

  5. Install the mirror in the reverse order of removal, and note these items:

    • Before installing the mirror, remove the TORX screw, and apply medium strength liquid thread lock to it.

    • Make sure the connector is plugged in properly.

    • Push the hooks into place securely.