Hyundai Elantra AD Quiz
Body Electrical System

LKAS Unit Repair Procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
8steps
~48min
2/5difficulty
Done 0 of 8

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the LDWS unit cover (A).
  3. Disconnect the LKAS unit connector (A).
  4. Remove the LKAS unit by disconnecting the mounting bracket (A).

Installation

  1. Align the LDWS unit with the windshield bracket using the front edge point (A).
  2. Hook the latches and rotate upward to secure the point (B).
    • The LKAS unit is fully assembled when a single click is heard.
  3. Connect the LKAS unit connector.
  4. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.