Hyundai Elantra AD Quiz
Body Electrical System

Power Seat Control Switch Repair Procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
6steps
~36min
2/5difficulty
Done 0 of 6

Inspection

Seat Control Switch
  1. With the power seat switch in each position, check that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch.
    [Power Seat Control Switch]

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front seat outer cover. (Refer to Body - "Front Seat Outer Cover")
  3. Remove the power seat control switch (A) after loosening the screws.

Installation

  1. Install the power seat control switch after connecting the connector.
  2. Install the front seat outer cover.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.