Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Rear Center Seat Belt Pretensioner Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
3steps
~18min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Replacement
  • When installing the seat belt, take care not to damage the pretensioner.
  1. Remove the parcel shelf trim. (Refer to Trim - "Rear Parcel Shelf Trim")
  2. Loosen the mounting bolts and remove the rear center seat belt pretensioner (A).

    Tightening torque: 39.2 ~ 54 N·m

  3. To install, reverse the removal procedure.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.