Resetting the Driver's Seat Memory System

Perform the following procedure to reset the driver's seat memory system when it does not operate properly.

To reset the driver's seat memory system

1. Turn the ignition switch to the ON position, place the shift lever in P (Park), and open the driver's door.

2. Using the control switch, move the driver's seat and seatback to the most forward position.

3. Press and hold the SET button and move the seat control switch forward for more than 2 seconds.

When resetting the driver's seat memory system

1. It starts with a notification sound.

2. The driver's seat and seatback move backward with a notification sound.

3. The driver's seat and seatback return to the initial position (center position) with a notification sound.

However, in the following cases, the reset procedure and notification sound may stop.

- A memory button is pressed.
- The control switch is operated.
- The shift lever is moved out of P (Park).
- Vehicle speed exceeds 2 mph (3 km/h).
- The driver's door is closed.

NOTICE

• If the reset procedure does not fully stop or the notification sound does not stop, repeat the reset procedure.
• Make sure there are no obstacles around the driver's seat before resetting the driver's seat memory system.

Easy Access Function

When exiting the vehicle, the driver's seat will move backward when the engine is off and the shift lever is in P (Park).

When entering the vehicle, the driver's seat will move forward when the ignition switch is turned to the ACC position.

You can activate or deactivate the Easy Access function in the User Settings mode on the LCD.

For more information, refer to the "LCD Display" section in this chapter.