Smart Key

Your HYUNDAI uses a smart key that allows you to lock or unlock the doors (and trunk) and even start the engine.

1. Door Lock
2. Door Unlock
3. Trunk Unlock
4. Panic

Locking

To lock:

1. Close all doors, the hood and the trunk.

2. Either press the door handle button or press the door lock button (1) on the smart key.

3. The hazard warning lights flash and the horn sounds.

4. Make sure the doors are locked by checking the position of the door lock button inside the vehicle.

Information

The door handle button will only work when the Smart Key is within 28~40 in. (0.7~1 m) of the outside door handle.

Even if you press the button on the outside door handle, the doors will not lock, and the horn will sound for three seconds if any of the following occurs:

• The smart key is inside the vehicle.
• The ENGINE START/STOP button is in the ACC or ON position.
• Any door other than the tailgate is open.

WARNING

Do not leave the Smart Key in the vehicle with children unattended. Unattended children may press the ENGINE START/STOP button, operate the power windows or other controls, or even cause the vehicle to move, which may result in serious injury or death.

Unlocking

To unlock:

1. Carry the Smart Key.

2. Either press the button on the driver's outside door handle, or press the unlock button (2) on the Smart Key.

3. The driver's door will unlock. The hazard warning lights will flash twice.

Two-Press Unlock Feature

The unlock priority for driver's door only or all doors with one press can be adjusted in the User Settings mode on the instrument cluster LCD.

If the two-touch unlock function is enabled, the user must press the door unlock button once to unlock only the driver's door, and twice to unlock all doors.

Select or deselect the "Two-Touch Unlock" check box in User Settings mode on the instrument cluster LCD. The option can be found in the following menu:

User Settings ➞ Door ➞ Two-Touch Unlock

The two-touch unlock function can also be enabled or disabled by simultaneously pressing the door lock and door unlock buttons on the smart key:

Press and hold the door lock button and the door unlock button at the same time until the hazard warning lights start flashing.

This will enable or disable the two-touch unlock function. Repeat this procedure to turn the function on or off again.

Information

• The door handle button will only work when the Smart Key is within 28~40 in. (0.7~1 m) of the outside door handle. Other people may also be able to open the doors.
• If you press the front passenger's outside door handle while carrying the Smart Key, all doors will unlock.
• After the doors are unlocked, they will automatically lock again after 30 seconds if no door is opened.
• The driver's or front passenger's door can be opened together with the door handle button when the Smart Key is within this range.

Opening the Trunk

To open:

1. Carry the Smart Key.

2. Either press the inside tailgate emblem, or press and hold the tailgate unlock button (3) on the Smart Key for more than one second. The hazard warning lights will flash twice.

3. Once the trunk is opened and then closed, the trunk will automatically lock.

Information

The tailgate handle button will only work when the Smart Key is within 28 in. (0.7 m) of the tailgate handle.

Panic button

Press and hold the panic button (4) for more than one second. The horn sounds and the hazard warning lights flash for approximately 30 seconds. To cancel panic mode, press any button on the Smart Key.

Starting

You can start the engine without inserting the key.

For more information, refer to "ENGINE START/STOP Button" in chapter 5.

NOTICE

To prevent damage to the Smart Key:

• Keep the Smart Key away from liquids and fire. Internal circuits may malfunction if the inside of the remote key becomes wet (from liquids or moisture) or if it is heated. This may void the warranty coverage for the remote key.
• Do not drop or throw the Smart Key.
• Protect the Smart Key from extreme temperatures.
• Always carry the Smart Key with you when leaving the vehicle. If the Smart Key is left near the vehicle, the vehicle battery may be discharged.

Mechanical Key

If the Smart Key does not work properly, you can lock or unlock the door using the mechanical key.

Press and hold the unlock button (1) and remove the mechanical key (2). Insert the mechanical key into the door lock cylinder.

To reinstall the mechanical key, insert the key into the slot and push it in until a click is heard.

Lost Smart Key

No more than two Smart Keys can be registered to one vehicle. If you lose a Smart Key, immediately take the vehicle and remaining keys to an authorized HYUNDAI dealer, or have the vehicle towed if necessary.

Smart Key Precautions

The Smart Key will not work if any of the following occurs:

• The Smart Key is near a radio transmitter, such as a radio station or airport, which may interfere with normal transmitter operation.
• The Smart Key is near a two-way mobile radio system or cellular phone.
• The Smart Key of another vehicle is used near your vehicle.

If the Smart Key does not work properly, lock or unlock the door using the mechanical key. If you have a problem with the Smart Key, contact an authorized HYUNDAI dealer.

If the Smart Key is in close proximity to your mobile phone, the signal may be blocked by your mobile phone's normal operating signals. This is especially important when the phone is active, such as when making and receiving calls, exchanging text messages, and/or sending/receiving e-mails.

Do not place the Smart Key and mobile phone in the same pants or jacket pocket, and always try to maintain sufficient distance between the two devices.

CAUTION

Keep the Smart Key away from electromagnetic materials that block electromagnetic waves to the key surface.

Information

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Battery Replacement

If the Smart Key does not work properly, try replacing the battery with a new one.

Battery type: CR2032

To replace the battery:

1. Remove the mechanical key.

2. Using a thin tool, pry off the back cover of the Smart Key.

3. Remove the old battery and insert a new one. Make sure the battery is positioned correctly.

4. Reinstall the rear cover of the Smart Key.

If you suspect that your Smart Key may have been damaged, or you feel the Smart Key is not working properly, contact an authorized HYUNDAI dealer.

Information

An improperly disposed of battery can harm the environment and human health. Dispose of the battery in accordance with local laws or regulations.