Wipers
Operates as follows when the ignition key is in the ON position.
MIST: For a single wipe cycle, push the lever up and release. The wipers will operate continuously while the lever is held in this position.
OFF: The wiper does not operate.
INT: The wiper operates intermittently at equal intervals. To change the speed, move the speed control lever. The highest setting operates the wipers most frequently (for heavier rain). The lowest setting operates the wipers least frequently (for lighter rain).
LO: The wiper operates at low speed.
HI: The wiper operates at high speed.
Information
If heavy snow or ice has accumulated on the windshield, defrost the windshield for approximately 10 minutes, or until the snow and/or ice is removed, before using the wipers to ensure proper operation.
If you do not remove the snow and/or ice before using the wiper and washer, the wiper and washer system may be damaged.
Test yourself
A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.