Hyundai Elantra CN7 Quiz

Clutch Pedal

In this manual: Clutch Pedal
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read


CLUTCH PEDAL - COMPONENTS

REMOVAL

1. Remove the cotter pin, washer and pin (with cotter pin hole).

2. Remove the clutch pedal mounting bolt.

INSPECTION

1. Check the bushings and clutch pedal shaft for wear.

2. Check the clutch pedal for deformation (bending and twisting).

3. Check the return spring for damage and deformation.

4. Check the clutch pedal pad for damage and wear.

ПРОВЕРКА ДАТЧИКА-ВЫКЛЮЧАТЕЛЯ ПЕДАЛИ СЦЕПЛЕНИЯ (СИСТЕМА БЛОКИРОВКИ ЗАМКА ЗАЖИГАНИЯ)

CLUTCH PEDAL POSITION SWITCH INSPECTION (IGNITION KEY INTERLOCK SYSTEM)

Check the continuity between terminals as specified in the table.

INSTALLATION 1. Install in the reverse order of removal.

2. Нанесите универсальную консистентную смазку на втулки педали сцепления.

2. Apply multipurpose grease to the clutch pedal bushings.

3. Apply multipurpose grease to the pin (with cotter pin hole) and washer in the clutch pedal connection.

4. Connect the clutch master cylinder pushrod to the clutch pedal.

5. Отрегулируйте люфт в соединении штифта педали сцепления.

5. Adjust the play in the clutch pedal pin connection.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.