Clutch Pedal

CLUTCH PEDAL - COMPONENTS

REMOVAL

1. Remove the cotter pin, washer and pin (with cotter pin hole).

2. Remove the clutch pedal mounting bolt.

INSPECTION

1. Check the bushings and clutch pedal shaft for wear.

2. Check the clutch pedal for deformation (bending and twisting).

3. Check the return spring for damage and deformation.

4. Check the clutch pedal pad for damage and wear.

CLUTCH PEDAL POSITION SWITCH INSPECTION (IGNITION KEY INTERLOCK SYSTEM)

Check the continuity between terminals as specified in the table.

INSTALLATION 1. Install in the reverse order of removal.

2. Apply multipurpose grease to the clutch pedal bushings.

3. Apply multipurpose grease to the pin (with cotter pin hole) and washer in the clutch pedal connection.

4. Connect the clutch master cylinder pushrod to the clutch pedal.

5. Adjust the play in the clutch pedal pin connection.