Hyundai Genesis DH Quiz
Body (Interior and Exterior)

A-Pillar Garnish Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
2steps
~12min
1/5difficulty
Done 0 of 2

Replacement
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • Be careful not to scratch the body surface.
  1. Using a screwdriver, remove the front pillar garnish (A).
    • Replace the A-pillar garnish (A) with a new one.
    [General Type]
    [Panoramic Sunroof Type]
    • Be careful not to damage the panoramic sunroof side molding connection. Remove the following components in order.: After removing the front part of the roof side molding, remove the A-pillar garnish.
  2. Install in the reverse order of removal.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.