Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Beltline Molding Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
4steps
~24min
2/5difficulty
Done 0 of 4

Replacement
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • Be careful not to scratch the body surface.
  1. Using a screwdriver or trim tool, remove the front beltline molding (A).
  2. Using a screwdriver or trim tool, remove the rear beltline molding (B).
  3. Using a screwdriver or trim tool, remove the fender beltline molding (C).
  4. Install in the reverse order of removal.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.