Hyundai Genesis DH Quiz
Engine Electrical System

Description and Operation

In this manual: Engine Electrical System
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
~1min read

Description

Ignition timing is controlled by the electronic spark advance control system. Standard reference ignition timing data for engine operating conditions is preprogrammed in the ECM (Engine Control Module) memory. Engine operating conditions (speed, load, warm-up state, etc.) are detected by various sensors. Based on these sensor signals and the ignition timing data, the primary current interrupt signal is sent to the ECM. The ignition coil is energized and the timing is controlled.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.