Front Seat Belt Buckle Repair Procedures

Replacement

1. 1
   Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")
2. 2
   Remove the two retaining clips using a flat-tip screwdriver, then remove the front seat integration connector cover (B).

   

3. 3
   To disconnect the front seat belt lock connector, use a pointed tool (A) as shown in the illustration below.

   

4. 4
   To disconnect the front seat belt lock connector, insert the pointed tools into the two holes in the front seat belt buckle connector.

   

5. 5
   Pull up the front seat belt lock connector (A).

   

6. 6
   Disconnect the connectors (A).
7. 7
   Loosen the mounting screws and remove the power memory seat unit (B).

   

8. 8
   Loosen the mounting screws and remove the front seat lower cover (A).

   

9. 9
   Disconnect the connectors of the power memory seat unit (A).

   

10. 10
    Remove the wiring harness (A) of the front seat belt lock connector.

    

11. 11
    Loosen the mounting bolt and remove the front seat belt buckle (A).

    Tightening torque: 39.2 ~ 54 N·m

    

12. 12
    Install in the reverse order of removal.

    Make sure the connector is properly connected. Replace all damaged clips.