Hyundai Genesis DH Quiz
Body Electrical System

Power Seat Memory Switch Repair Procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
9steps
~54min
2/5difficulty
Done 0 of 9

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver's door trim panel. (Refer to Body - Front Door Trim Panel)
  3. Disconnect the power seat memory switch connector (A).
  4. Loosen the mounting screws and remove the power seat memory switch (A).

Installation

  1. Install the power seat memory switch (IMA).
  2. Install the door trim panel.
  3. Connect the negative (-) battery terminal.

Inspection

  1. Disconnect the power seat memory connector.
  2. While pressing each switch, check the electrical current between the power seat memory switch connector and ground. If the current does not meet specification, replace the switch.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.