Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Outside Rear View Mirror Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
4steps
~24min
2/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Replacement
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-tip screwdriver or remover, wrap the tools with protective tape to prevent damage to the components.
  • Be careful not to scratch the body surface.
  1. After loosening the mounting clips, remove the front door inner frame cover (A).
  2. Disconnect the outside rear view mirror connector (A).
  3. After loosening the mounting bolts, remove the outside rear view mirror (B).

    Tightening torque: 6.9 ~ 10.8 N·m

  4. Install in the reverse order of removal.
    • Make sure the connector is properly connected.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.