Body Electrical System

PGS Unit (Rear and Blind-Spot Units) Repair Procedures

6steps
~36min
2/5difficulty
Done 0 of 6

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the glove box housing (A). (Refer to Body - "Glove Box")
  3. Loosen the nuts, then remove the PGS unit (A).

Installation

  1. Install the PGS unit.
  2. Install the glove box housing.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.