Description and Operation

Description

Control Function: This system supports 2 main functions. (Rear video display function, expected wheel track display function). The rear video image and expected wheel track display operate according to vehicle speed and gear position. Rear View Monitor Function

The PGS supplies power to the rear view camera (at speed of 30 km/h or less, rear view mode). This is required to prevent the delay time caused by the switching process from the front camera to the rear camera or vice versa. The rear video appears when the shift lever is moved to the R position in the ready state. The rear video is not related to vehicle speed. According to the OPTION, guide lines with steering wheel angle and/or neutral guide lines are overlaid on the rear view video image. Rear View Mode Function. The PGS operating conditions for rear view camera display are as follows.

1. 1
   When the IGN1 signal is on.
2. 2
   When the R position signal is on and the P position signal is off.

If all the above operating conditions are met, the PGS enters rear mode. This is not related to vehicle speed. Reverse path display by steering wheel angle: the rear view mode includes a function that overlays guide lines on the camera video image.

• Expected path related to steering wheel angle.
• Expected path with the steering wheel in neutral position:

The guide line composition is as follows.

1. 1
   0.5 m from rear bumper
2. 2
   1.0 m from rear bumper
3. 3
   3.0 m from rear bumper
4. 4
   Driver-side wheel track

   A.	Width: vehicle width + 30 cm

5. 5
   Passenger-side wheel track

   A.	Width: vehicle width + 30 cm