Body (Interior and Exterior)

Rear Center Seat Belt Pretensioner Repair Procedures

5steps
~30min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Replacement

  • When installing the seat belt, take care not to damage the pretensioner.
  1. Remove the rear parcel tray trim. (Refer to Interior Trim - "Rear Tray Garnish".)
  2. Remove the rear sunshade assembly. (Refer to Body Electrical System - "Rear Sunshade")
  3. Remove the rear parcel tray pad (A).
  4. Loosen the pretensioner mounting bolt (A), then remove the rear center seat belt (B).

    Tightening torque: 39.2 ~ 54 N·m

  5. Install in the reverse order of removal.
    • Make sure the connector is properly connected.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.