Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Rear Seat Belt Pretensioner Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
6steps
~36min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Replacement
  • When installing the seat belt, take care not to damage the pretensioner.
  1. Remove the rear parcel tray trim. (Refer to Interior Trim - "Rear Tray Garnish".)
  2. Remove the rear sunshade assembly (Refer to Body Electrical System - "Rear Sunshade")
  3. Remove the rear parcel tray pad (A).
  4. Loosen the mounting bolt, then remove the lower anchor of the rear seat belt (A).

    Tightening torque: 39.2 ~ 54 N·m

  5. Loosen the pretensioner mounting bolt (A), then remove the rear seat belt (B).

    Tightening torque: 39.2 ~ 54 N·m

    [LH]
    [RH]
  6. Install in the reverse order of removal.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.