Steering

Repair Procedures

9steps
~59min
3/5difficulty
1special tools
Done 0 of 9

Removal

  1. Disconnect the negative battery cable from the battery and wait at least 30 seconds.
  2. Turn the steering wheel so that the front wheels are in the straight-ahead position.
  3. Remove the airbag module. (Refer to Restraint System - Driver Airbag Module (DAB) and Clock Spring)
  4. Disconnect the connector and the lock bolt (A), then remove the steering wheel using the special service tool (09561-11001).
    Tighten the lock bolt properly and install the SST (09561-11001) to easily separate the steering wheel.
  5. Install in the reverse order of removal.

Disassembly

  1. Unscrew the screw and separate the lower cover.
  2. Disconnect the remote switch connector on the steering wheel (A).
  3. Remove the remote control switch (A) and (B).
  4. Install in the reverse order of removal.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.