Body (Interior and Exterior)

Repair Procedures

8steps
~48min
2/5difficulty
Done 0 of 8

Replacement

  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • When removing interior trim components, use a plastic panel removal tool to avoid damaging the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  2. Remove the rear seatback assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  3. After loosening the mounting bolts, remove the panel and partition assembly (A).
  4. Remove the luggage compartment panel (B).
  5. Remove the rear cross trim (C).
  6. Remove the rear partition upper trim (D).
  7. Loosen the mounting screws, then remove the luggage compartment side trim (E).
  8. Install in the reverse order of removal.
    • Replace any damaged clips.
    1. Luggage Compartment Side Trim [LH]
    2. Luggage Compartment Side Trim [RH]
    3. Luggage Net
    4. Luggage Compartment Cover
    5. Luggage Under Cover
    6. Rear Cross Trim
    7. Panel and Partition Trim
    8. Partition Upper Trim

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.