Repair Procedures

Removal

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the glove box housing. (Refer to Body - "Glove Box")
3. 3
   Disconnect the connectors from the Body Control Module (A).

   

4. 4
   Remove the mounting nuts (2) to loosen the BCM (A).

   

Installation

1. 1
   Install the Body Control Module.
2. 2
   Install the glove box housing.
3. 3
   Connect the negative (-) battery terminal.

BCM Diagnosis Using GDS

1. 1
   The vehicle electrical system malfunction can be quickly diagnosed using the Hyundai Diagnostic System (GDS). The GDS provides the following information.

   1. Self-Diagnosis: Checks malfunction and Diagnostic Trouble Code (DTC)
   2. Current Data: Check the system input/output status.
   3. Actuation Test: Check the system operating status
   4. Additional Functions: Controls other functions, including system parameter setting and zero point adjustment.
2. 2
   Select "Vehicle Model" and "Body Control Module (BCM)" for inspection to check the vehicle with the scan tool.
3. 3
   Select the "Current Data" menu to check the current input/output status.
4. 4
   To forcibly activate the input value of the module under test, select the "Active Test" option.

   

5. 5
   To change a user setting, select "User Setting".