Body Electrical System

Parking Assist Sensor Repair Procedures

6steps
~36min
2/5difficulty
Done 0 of 6

DEPOSIT

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear bumper cover. (Refer to Body - Rear Bumper Cover)
  3. Disconnect the sensor connector (A).
  4. Remove the sensor (A) by opening the sensor holder (B).

REMEDY

  1. Install the ultrasonic sensor after connecting the connector.
  2. Install the bumper.

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.