Body Electrical System

Speaker Repair Procedures

12steps
~72min
3/5difficulty
Done 0 of 12

Inspection

  1. Speaker Troubleshooting
    1. Basic Speaker Inspection: Check the sound from the speaker, making sure the speaker mounting screws are removed and the wiring connector is connected to suppress possible vibrations transmitted by the body trim and nearby parts.
    2. Troubleshooting
      NO Housing Control/Means
      1 Rattling Noise
      1. Before replacing the speaker, check that the fixing screw is installed properly. (Check the speaker mounting area by hand.)
      2. If there is no click noise, remove the speaker, then check for rattling noise. Before installing the speaker, make sure no rattling noise is heard.
      K. If the speaker produces a rattling noise that cannot be eliminated, replace it with a new one.
      b. If the removed speaker sounds satisfactory, simply replace the damaged part.
      2 Noise
      1. Make sure the wiring connector is securely connected. Otherwise, reconnect it.
      2. If there is static noise from the radio, check whether there is noise coming from the CD.
      3. If you hear noise when the radio and CD are playing, replace the speaker.
      3 Speaker
      Inoperative
      Check the wiring connection between the battery and speaker
      1. Before replacing the speaker, check whether the wiring connection between the battery and speaker is normal.
      2. Check the speaker power supply and resistor, then check the sound quality. ■ Specified impedance: 4.0 ± 0.6 Ω
      3. If the speaker is faulty, replace it with a new one.

DEPOSIT

Front Speaker
  1. Remove the front door trim panel. (Refer to Body - "Front Door Trim")
  2. Remove the front speaker (A) after removing 3 rivets.
  3. Remove the tweeter (A) after loosening the screws.
  4. Remove the rear door trim panel. (Refer to Body - "Rear Door Trim")
  5. Remove the rear speaker (A) after removing 3 rivets.
  6. Remove the tweeter (A) after loosening the screws.
Rear Speaker

REMEDY

Front Speaker
  1. Install the front speaker.
  2. Install the tweeter.
  3. Install the front door trim panel.
  4. Install the rear speaker.
  5. Install the tweeter.
  6. Install the rear door trim panel.
Rear Speaker

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.