Front Washer Motor Repair Procedures

Inspection

1. 1
   When the washer motor is connected to the reservoir, fill the washer reservoir with water.
2. 2
   Connect the positive (+) battery cable to terminal 1, and the negative (-) battery cable to terminal 2.
3. 3
   Make sure the motor operates correctly and that the washer motor works and water flows from the front nozzles.
4. 4
   If the windshield washer motor is noticed to operate abnormally, replace it. [Front and Rear Washers]

   NO	Description
   1	Windshield washer (+)
   2	Ground
   3	Rear Washer (+)

   
   

   

   

DEPOSIT

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the right front wheel guard. (Refer to Body - Front Fender)
3. 3
   Loosen the bolts (B) and remove the windshield washer reservoir (A), then disconnect the washer motor connector (C).

   

4. 4
   Remove the washer motor (A).

   

REMEDY

1. 1
   Assemble the windshield washer reservoir.
2. 2
   Connect the washer hose and the washer motor connector.
3. 3
   Install the right front wheel guard.