Repair Procedures

DEPOSIT

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the instrument panel center panel. (Refer to Body - Instrument Panel)
3. 3
   Remove the BCM (A) after loosening the nut, and disconnect the connectors (B).

   

REMEDY

1. 1
   Install the BCM.
2. 2
   Install the instrument panel center panel.
3. 3
   Connect the negative (-) battery terminal.

BCM Diagnosis Using GDS

1. 1
   The body electrical system can be quickly diagnosed for defective parts using the Global Diagnostic System (GDS). The GDS provides the following information.

   1. Self-diagnosis: checking and displaying diagnostic trouble codes (DTC)
   2. Current data: checking the input/output status of the system
   3. Actuation test: checking the operating conditions of the system
   4. Additional function: control other than operation, such as option setting and zero point adjustment
2. 2
   Select the "Vehicle Model" and the system to be checked in order to inspect the vehicle with the scan tool.
3. 3
   Select "Body Control Module (BCM)".
4. 4
   Select "Current Data" to check the current status, input/output. Input/output for the sensors connected to the BCM can be checked.

   

5. 5
   To perform data operation of each module, select "Activation Test".

   

6. 6
   To change a user setting, select "User Setting".