Repair Procedures

REPLACEMENT

1. 1
   Slightly loosen the wheel nuts. Raise the vehicle and make sure it is properly supported.
2. 2
   Remove the tire and rear wheel from the rear hub.

   Tightening torque: 107.9 - 128 N·m

3. 3
   Remove the clip (A).

   

4. 4
   Remove the spring (A), then the trailing arm support bolt (B).

   

   Distance (A+D): 3 mm (0.12 in.) max.

   

5. 5
   Disconnect the parking brake cable.

   

6. 6
   Remove the caliper mounting bolts, then hang the brake caliper assembly (A) with wire.

   Tightening torque: 63.7 ~ 74 N·m

   

7. 7
   Loosen the set screws, then remove the brake disc.

   Tightening torque: 4.9 - 5.8 N·m

   

8. 8
   Loosen the hub mounting bolt, then remove the hub. Torsion-rigid axle.

   Tightening torque: 49.0 ~ 59 N·m

   

   

9. 9
   To install, perform the removal procedure in reverse order.