Body Electrical System
Antenna Repair Procedures
In this manual: Body Electrical System
9steps
~54min
2/5difficulty
Done 0 of 9
Removal
Roof Antenna- Disconnect the negative (-) battery terminal.
- Remove the roof trim assembly. (Refer to Body - "Roof Trim Assembly")
- Disconnect the roof antenna cable and connector (A), then remove the antenna mounting nut.

- Remove the radio antenna (B).

Installation
Install the radio antenna. Connect the connector and cable. Install the roof trim.Inspection
Antenna Cable- Check continuity between the center terminals of the antenna cable.

- Check the continuity between the outer terminals of the antenna cable. There should be continuity.

- If there is no continuity, replace the antenna cable.
- Check the continuity between the center terminal (A) and the outer terminal (B) of the antenna cable. There should be no continuity.

- If there is continuity, replace the antenna cable.
Test yourself
A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?