Hyundai Kona Quiz
Body Electrical System

Audio Unit Repair Procedures

In this manual: Body Electrical System
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
11steps
~66min
3/5difficulty
Done 0 of 11

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the center panel. (Refer to Body - "Center Panel")
  3. Remove the crash pad garnish. (Refer to Body - Crash Pad Garnish Assembly)
  4. Remove the head unit after loosening the screws.
  5. Remove the audio system upper cover (A).
  6. Remove the audio system mounting bracket (A).
  7. Remove the head unit (B) after disconnecting the connectors and cable (A).

Installation

  1. Connect the audio unit connectors and cable.
  2. Install the head unit.
  3. Install the center fascia panel.
  4. Connect the negative (-) battery terminal.
    1. Make sure the connector is properly connected.
    2. Check the audio system.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.