Hyundai Kona Quiz
Body (Interior and Exterior)

Crash Pad Garnish Assembly [RH] Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
5steps
~30min
2/5difficulty
Done 0 of 5

Replacement

  1. Remove the instrument cluster fascia. (Refer to Instrument Cluster - "Center Fascia Panel")
  2. Using a screwdriver or a trim removal tool, remove the side cover of the garnish [RH] (A).
  3. Loosen the mounting screws and remove the garnish assembly [RH] (A).
  4. Disconnect the hazard switch connector (A).
  5. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.