Body (Interior and Exterior)

Front Door Side Weatherstrip Repair Procedures

5steps
~30min
2/5difficulty
0102030405032.424N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Replacement

[Front Door Side Weatherstrip]

  1. Loosen the front door adjusting washer (B) mounting bolt.

    Tightening Torque: 21.6–32 N·m

  2. Disconnect the clips, then remove the front door side weatherstrip (A).
  3. To install, reverse the removal procedure.

[Front Door Side Body Weatherstrip]

  1. Disconnect the clips, then remove the front door body side weatherstrip (A).
  2. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.