Hyundai Kona Quiz
Body (Interior and Exterior)

Front Seat Assembly Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
3steps
~18min
2/5difficulty
02040608010063.747N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Replacement

  1. Open the cover and loosen the front seat mounting bolts. [Front]

    Tightening Torque: 49.0–64 N·m

    [Rear]
  2. Disconnect the main connector (A), side airbag connector (B), and front seat belt lock connector (C). [Driver]
    [Passenger]
  3. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.