Hyundai Kona Quiz
Body (Interior and Exterior)

Front Seat Cushion Cover Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
8steps
~48min
3/5difficulty
Done 0 of 8

Replacement

  1. Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")
  2. Remove the front seat inner shield cover. (Refer to Front Seat - Front Seat Inner Shield Cover)
  3. Remove the front seat outer shield cover. (Refer to Front Seat - Front Seat Outer Shield Cover)
  4. Remove the front seat lower shield (A).
  5. Remove the protector (A) from the front seat cushion frame. [Lower]
    [Upper]
    [LH]
    [RH]
  6. Remove the front seat cushion cover (A) from the seat cushion frame.
  7. After removing the hook-and-loop fastener (A) from the inside of the front seat cushion cover, remove the seat cushion cover (B).
  8. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.