Relay Box (Interior) Repair Procedures

Fuse Inspection

1. 1
   Make sure there is no play in the fuse holders and that the fuses are held securely.
2. 2
   Is the rating of the fuse specified correctly for each circuit?
3. 3
   Is any fuse blown?

Diagnosis with GDS

1. 1
   Body electrical system malfunctions can be quickly diagnosed with the Global Diagnostic System (GDS). The GDS provides the following information.

   1. 1) Self-Diagnosis: Check and display diagnostic trouble codes (DTC).
   2. 2) Current Data: Check system input/output status.
   3. 3) Actuator test: Check the operating status of the system.
   4. 4) Additional Functions: Other controls such as option selection and zero point adjustment.
2. 2
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
3. 3
   Select "Smart Junction Box (SJB)".
4. 4
   Select the "Current Data" menu to check the current input/output status. Input/output data for the sensors connected to the Smart Junction Box (SJB) can be checked.

   

5. 5
   To forcibly check the operation of the power door lock, select "Active Test".

   

6. 6
   To change a user setting, select "User Settings".

   

   

Removal

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the emergency pad lower panel. (Refer to Body - "Emergency Pad Lower Panel")
3. 3
   Disconnect the connectors (A) on the fuse side of the SJB (B).

   

4. 4
   Remove the SJB after loosening the mounting nuts.

   

Installation

1. 1
   Install the smart junction box.
2. 2
   Install the emergency pad lower panel.
3. 3
   Connect the negative (-) battery terminal.
4. 4
   Make sure that the entire system operates normally.