Suspension System (without ECS)
Specifications
In this manual: Suspension System (without ECS)
~2min read
Specifications
Front Suspension| Item | Specification | |
| Suspension Type | MacPherson Strut | |
| Shock absorber | Type | Gas |
Rear Suspension
| Item | Specification | |
| Suspension Type | Torsion Beam Axle | |
| Shock absorber | Type | Gas |
Wheels and Tires
| Item | Specification | |
| Steel | 6.5J x 16 | |
| Aluminum | 6.5J x 16 | |
| 7.0J x 17 | ||
| 7.5J x 18 | ||
| Tire | 205/60 R16 | |
| 215/55 R17 | ||
| 235/45 R18 | ||
| Tire Pressure | 205/60 R16 | 2.3 + 0.07 kgf/cm² (33 + 1.0 psi) |
| 215/55 R17 | ||
| 235/45 R18 | ||
Wheel Alignment
| Item | Specification | ||
| Front | Rear | ||
| Toe | Individual | 0,06° ± | 0,15° |
| General | 0,12° ± 0,3° | 0,3° ± 0,4° | |
| Camber Angle | -0,5° ± 0,6° | -1,2° ± 0,6° | |
| Caster Angle | 4,5° ± 0,6° | - | |
| Kingpin Angle | 13,9° ± 0,5° | - | |
| Ground Clearance | 403 ± 10 mm (15.86 ± 0.4 in.) | 410 ± 10 mm (16.14 ± 0.4 in.) | |
Tightening Torque
Front Suspension| Item | Tightening Torque (kgf·m) | ||
| N·m | kgf·m | lb-ft | |
| Hub Nut | 107,9 - 127,5 | 11,0 - 13,0 | 79,6 - 94,0 |
| Lower Arm to Front Subframe (Front) | 117,7 - 137,3 | 12,0 - 14,0 | 86,6 - 101,3 |
| Lower Arm to Rear Subframe (Rear) | 156,9 - 176,5 | 16,0 - 18,0 | 115,7 - 130,2 |
| Lower Arm Ball Joint | 58,8 - 70,6 | 6,0 - 7,2 | 43,4 - 52,1 |
| Tie Rod End Castle Nut | 24,5 - 34,3 | 2,5 - 3,5 | 18,1 - 25,3 |
| Steering Gear to Subframe | 88,3 - 107,9 | 9,0 - 11,0 | 65,1 - 79,6 |
| Stabilizer Bar to Stabilizer Link | 98,1 - 117,7 | 10,0 - 12,0 | 72,3 - 86,8 |
| Stabilizer Bar Bracket Bolts | 44,1 - 53,9 | 4,5 - 5,5 | 32,5 - 39,8 |
| Stabilizer Bar Link to Strut Assembly | 98,1 - 117,7 | 10,0 - 12,0 | 72,3 - 86,8 |
| Strut Assembly with Steering Knuckle | 156,9 - 176,5 | 16,0 - 18,0 | 115,7 - 130,2 |
| Strut Assembly to Frame | 53,9 - 73,5 | 5,5 - 7,5 | 39,8 - 54,2 |
| Strut Assembly Self-Locking Nut | 98,1 - 107,9 | 10,0 - 11,0 | 72,3 - 79,6 |
| Universal Joint to Steering Gear Pinion | 32,4 - 37,3 | 3,3 - 3,8 | 23,8 - 27,5 |
| Subframe Mounting Bolt and Nut | 176,5 - 196,1 | 18,0 - 20,0 | 130,2 - 144,7 |
| Strut Bracket to Subframe Bolts | 44,1 - 53,9 | 4,5 - 5,5 | 32,5 - 39,8 |
| Roller Link Bolt and Nut | 107,9 - 127,5 | 11,0 - 13,0 | 79,6 - 94,0 |
| 49,0 - 63,7 | 5,0 - 6,5 | 36,2 - 47,0 | |
Rear Suspension
| Item | Tightening Torque (kgf·m) | ||
| N·m | kgf·m | lb-ft | |
| Hub Nut | 107,9 - 127,5 | 11,0 - 13,0 | 79,6 - 94,0 |
| Shock Absorber to Body | 49,0 - 63,7 | 5,0 - 6,5 | 36,2 - 47,0 |
| Shock Absorber to Torsion Beam Axle | 98,1 - 117,7 | 10,0 - 12,0 | 72,3 - 86,8 |
| Torsion Beam Axle to Remain | 98,1 - 117,7 | 10,0 - 12,0 | 72,3 - 86,8 |
| Torsion Beam Axle to Remain on Frame | 98,1 - 117,7 | 10,0 - 12,0 | 72,3 - 86,8 |
Test yourself
A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?