SRS Care

The SRS requires virtually no maintenance, and there are no parts that can be safely serviced by the owner. If the SRS airbag warning light does not illuminate when the ignition switch is turned to the ON position, or remains illuminated continuously, we recommend that the system be inspected immediately by an authorized HYUNDAI dealer.

We recommend that any work on the SRS system, such as removal, installation, or repair, or any work on the steering wheel, front passenger panel, front seats and roof rails, be performed by an authorized HYUNDAI dealer. Improper handling of the SRS system may result in serious injury.

WARNING

To reduce the risk of serious injury or death, observe the following precautions:

• Do not attempt to modify or disconnect SRS components or wiring, including adding any type of emblems to the covers or modifications to the vehicle body structure.
• Do not place objects over or near the airbag modules in the steering wheel, instrument panel, or front passenger panel above the glove box.
• Clean the airbag covers with a soft cloth dampened with plain water. Solvents or cleaning agents may damage the airbag covers and deployment system.
• We recommend that airbags be replaced by an authorized HYUNDAI dealer.
• If SRS components must be disposed of, or if the vehicle is to be scrapped, certain precautions must be observed. Consult an authorized HYUNDAI dealer for the necessary information. Failure to observe these precautions may increase the risk of injury.