Hyundai Palisade Quiz
Engine Electrical System

Cruise control switch

In this manual: Engine Electrical System
General Information — 10Engine Mechanical System — 56Engine Electrical System — 28Emission Control System — 21Engine Control System/Fuel System — 42Automatic Transmission System (A8LF1) — 33All-Wheel Drive (AWD) System — 16Drive Shaft and Axle — 19Suspension System — 28Steering — 17Restraints — 20Brake System — 39Body (Interior and Exterior) — 142Body Electrical System — 171Heating, Ventilation, and Air Conditioning — 47Advanced Driver Assistance System (ADAS) — 44
12steps
~72min
3/5difficulty
Done 0 of 12

Components and Component Location

Components

Hyundai Palisade. Components and components location
1. Left Remote Control Switch
(Audio + Hands-free + Voice)		 2. Right remote control switch
(cruise + trip computer)

Circuit Diagrams

Wiring Diagram

Hyundai Palisade. Schematic diagrams

[Trip + ACC]

Hyundai Palisade. Schematic diagrams

[Trip + ASCC]

Hyundai Palisade. Schematic diagrams

Repair Procedures

Inspection

  1. Check the resistance between terminals at each switch position (RH).
    Hyundai Palisade. Repair procedures
    [RH: Cruise + Trip]
    Switch Connector
    Terminal    		 Resistance
    (±5%)
    Cancel 2-6 390 Ω
    SET - 610 Ω
    VOICE + 910 Ω
    CRUISE ON/OFF 1.38 kΩ
    ASCC (Advanced Smart Cruise Control) 3.63 kΩ

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the steering wheel assembly. (Refer to Steering System – Steering Wheel)
  3. Remove the steering wheel rear cover (A) after loosening the mounting screws.
    Hyundai Palisade. Repair procedures
  4. Disconnect the remote control switch connector on the steering wheel (A). [Left]
    Hyundai Palisade. Repair procedures
    [RH]
    Hyundai Palisade. Repair procedures
  5. Remove the remote control switch assembly from the steering wheel (A) after loosening the mounting screws.
    Hyundai Palisade. Repair procedures
  6. Remove the remote control switch from the steering wheel (A) after loosening the mounting screws.
    Hyundai Palisade. Repair procedures

Installation

  1. Install the remote control switch on the steering wheel.
  2. Install the remote control switch assembly on the steering wheel.
  3. Connect the remote control switch connector on the steering wheel.
  4. Install the steering wheel rear cover.
  5. Install the steering wheel and the driver airbag module.
  6. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.