Hyundai Palisade Quiz
Body Electrical System

Description and Operation

In this manual: Body Electrical System
General Information — 10Engine Mechanical System — 56Engine Electrical System — 28Emission Control System — 21Engine Control System/Fuel System — 42Automatic Transmission System (A8LF1) — 33All-Wheel Drive (AWD) System — 16Drive Shaft and Axle — 19Suspension System — 28Steering — 17Restraints — 20Brake System — 39Body (Interior and Exterior) — 142Body Electrical System — 171Heating, Ventilation, and Air Conditioning — 47Advanced Driver Assistance System (ADAS) — 44
5steps
~30min
2/5difficulty
Done 0 of 5

Description

This system uses a light sensor to automatically turn on the tail lamps and headlamps based on changes in the ambient light condition. It is activated when the vehicle enters or exits a tunnel, or when the ambient light condition changes due to rain, snow, or fog. Precautions for using this system are as follows.
  1. Do not install any other device on top of this device.
  2. Be sure to switch to manual mode in conditions of poor visibility, such as fog, heavy rain, or cloudy weather.
  3. The light intensity in an actual vehicle is not always constant, and the lamp on/off timing may vary greatly depending on climate, season, and surrounding environment.
  4. Use this system only during sunrise and sunset, and manually. Refer to the ON/OFF indicator lamp for general conditions.
  5. A malfunction may occur if a light coating blocks the light, which may affect the internal lighting applied.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.