Body (Interior and Exterior)

Front Seat Belt Buckle

4steps
~24min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Component Location

Component Location

Hyundai Palisade. Components and components location
1. Front Seat Belt Buckle

Repair Procedures

Replacement

Hyundai Palisade. Repair procedures
  • When removing with a flat-blade screwdriver or puller, wrap the tool with protective tape to prevent damage to the components.
  • Wear gloves to avoid cutting your hands.
  1. Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")
  2. Disconnect the front seat belt buckle switch wire (A).
    Hyundai Palisade. Repair procedures
  3. Loosen the mounting bolt and remove the front seat belt buckle (A).

    Torque: 39.2 – 54 N·m

    Hyundai Palisade. Repair procedures
  4. To install, reverse the removal procedure.
    Hyundai Palisade. Repair procedures
    • Make sure the connector is properly connected.
    • Replace any damaged clips (or pin-type retainers).

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.