Body Electrical System
Power door mirror actuator
In this manual: Body Electrical System
8steps
~48min
2/5difficulty
Done 0 of 8
Repair Procedures
Removal
- Disconnect the (-) battery terminal.
- Using a clip remover (C), remove the mirror (A) as shown in the illustration below.



- Protect the mirror from the removal tool by wrapping it with cloth (B).
- Be careful not to damage the mirror and mirror housing during the removal process.
- Apply force around the center of the mirror, because applying force to the end of the mirror will break it.
- Disconnect the heater wire connectors (A) and remove the mirror.

- Remove the mirror actuator mounting screw.

- Disconnect the connector (A) and remove the mirror actuator.

Installation
- Connect the actuator connector, then install the mirror actuator.
- Connect the mirror heater wire connector, then install the mirror.
- Connect the (-) battery terminal, then check that the mirror operates normally.
Test yourself
A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?