Body (Interior and Exterior)
Rear spoiler
In this manual: Body (Interior and Exterior)
5steps
~30min
2/5difficulty
Done 0 of 5
Components and Component Location
Component Location

| 1. Rear Spoiler |
Repair Procedures
Replacement
|
- Remove the rear door upper trim. (Refer to Rear Door - "Rear Door Trim")
- Remove the rear spoiler plug hole cover (A) and loosen the mounting nuts. [LH]
[RH]

- Disconnect the rear stop lamp connector (A) and the rear washer nozzle (B).

- Loosen the mounting nuts and remove the rear spoiler (A).
Tightening torque: 2.9–3.9 N·m


- To install, reverse the removal procedure.

- Make sure the connector is properly connected.
- Replace any damaged clips (or pin-type retainers).
Test yourself
A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
